Cuff Hydraulic Die Cutting Machine

The cuff die cutting machine is suitable for cutting different nonmetal materials by die cutter.Such as  Jacket Knitted Cuff,Knitting Fabric Cuff, Non Woven and so on.

1.The cuff hydraulic swing arm die cutting machine's quality is very good,low noise and low oil consumption.
2.Operation of the cuff die cutting press is very convenient,prompt and simple.
3.When you operate the cuff die cutting machine,you should use your two hands. Because it's more safe and reliable.
4.Setting of the knife mold is fast,accurate,prompt,simple and easy-to-learn.
5.Other features can be added on request.
Model                              GSB-8,GSB-10                 GSB-2C/10/12/14/16/18
Maximum cutting power(KN/TONS)     78.5KN(8TONS), 98KN(10TONS)  10ton to 18 tons
Cutting Table                      650×350mm                   800×400mm,900×430,450mm
Swaying arm width(mm)              350mm                        350mm
Max.Stroke(mm)                     75mm                         75mm
Motor Power(KW/HP)                 0.75KW/1HP                   0.75KW/1.5HP
Machine Dumensions(mm)             600×800×1500mm             900×900×1400mm
Packing Size(mm)                   1050×1050×1500mm           1350×1200×1550mm
Net Weight(No oil)(Kg)             580kg                        750-910kg
Gross Weight(Kg)                   650kg                        800-950kg

Hemp Hydraulic Die Cutting Machine

Hemp Hydraulic Die Cutting Machine

1.Oil is supplied to all sliding parts of this machine by the hydraulic system for lubrication, reducing wear and prolonging the service life of the machine.
2.Structural changes during designing of this machine remove the need for the users to worry about possible oil leakage of the machine.
3.External motor and oil pump enable good ventilating and cooling conditions , safety operation and prolonged service life.
4.With special setting mechanism, and equipped with die cutter and cutting depth setting, the travel adjustment is simple and accurate.
5.Hemp hydraulic precision four-column die cutting machine of special specification can be customized.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

Invitation Card Hydraulic Traveling Head Die Cutting Machine

The invitation card hydraulic traveling head  cutting machine applies to the shaping and the cutting of one layer or several layers of the materials.

1.Easy to learn how to operate the invitation card die cutting machine .
2.Setting of the knife mold is rapid,accurate and convenient.
3.The hydraulic system operates under enclosed environment, it requires little to the working environment .
4.The press board's lifting position can be freely set,so that reducing idle travel and improve work efficiency.
5.Invitation card hydraulic travlly die cutting machine of special specification can be customized.
Model                             GRM-25/30/40/50/80/100         GRD-25/30/40/50/80/100
Maximum cutting power(KN/TONS)    25/30/40/50/80/100 Tons        25/30/40/50/80/100 Tons
Cutting Table                    (1600-2500)×(500-1500mm)       (1600-2500)×(500-1500mm)
Traveling head size(mm)          (500mm-1500mm)×(500-1500mm)    (500mm-1500mm)×(500-1500mm)
Max.Stroke(mm)                    150mm                          150mm
Motor Power(KW/HP)                2.2-5.5kw                      2.2-5.5kw
Machine Dumensions(mm)            2200×620×2000mm or more      2200×620×2000mm or more
Weight(kg)                        2300kg                         2300kg

Silicone Vacuum Membrane Hydraulic Die Cutting Machine

The Silicone Vacuum Membrane Hydraulic Die Cutting Machine is widely applicable to cutting of various nonmetal materials by die cutter.

1.The silicone keypad hydraulic clicking press's motor power is small,can ensure the low powe consumption of it.
2.Using two hands toe operate the switch to ensure the safety of operators.
3.The characteristics of silicone keypad hydraulic cutting machine include low noise and low consumption.
4.Using a time-lapse circuit to control the lower limit of stroke,so that ensure the silicone keypad is high quality.
5.Other features of the silicone keypad hydraulic die cutting machine can be added on request.
Model                              GSB-8,GSB-10                 GSB-2C/10/12/14/16/18
Maximum cutting power(KN/TONS)     78.5KN(8TONS), 98KN(10TONS)  10ton to 18 tons
Cutting Table                      650×350mm                   800×400mm,900×430,450mm
Swaying arm width(mm)              350mm                        350mm
Max.Stroke(mm)                     75mm                         75mm
Motor Power(KW/HP)                 0.75KW/1HP                   0.75KW/1.5HP
Machine Dumensions(mm)             600×800×1500mm             900×900×1400mm
Packing Size(mm)                   1050×1050×1500mm           1350×1200×1550mm
Net Weight(No oil)(Kg)             580kg                        750-910kg
Gross Weight(Kg)                   650kg                        800-950kg

Plastic Sheet Hydraulic Die Cutting Machine

The machine is applicable to die cutting operation of various nonmetal slices materials by die cutter.

1.The hydraulic system works under enclosed environment,there is no request of the working environment.
2.Minimizes the need of maintenance, offering maximum reliability and high value over time.
3.Simple and efficient cutting point setting .
4.Euipped with automatic self-lubricating system,ensure the low wear of plastic sheet hydraulic die cutting machine.
5.Plastic sheet hydraulic precision four-column die cutting machine of special specification can be customized.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

Hat Brim Hydraulic Clicker Press

This cutting machine is mainly suitable for cutting materials like plastic cutting out.

1.Time control allow for simple and convenient setting of the cutter depth.
2.Using the inertial energy of flying wheel, can reduce the energy consumption and let the operation stable.
3. Adjusting height of swing arm by handle , so the operation is very simple,prompt and convenient.
4.Because the rotation of swing arm is flexible , the operation is very easy . Saving labor and time.
5. Hat brim hydraulic die cutting machine of special specification can be customized according to your request.
Model                              GSB-8,GSB-10                 GSB-2C/10/12/14/16/18
Maximum cutting power(KN/TONS)     78.5KN(8TONS), 98KN(10TONS)  10ton to 18 tons
Cutting Table                      650×350mm                   800×400mm,900×430,450mm
Swaying arm width(mm)              350mm                        350mm
Max.Stroke(mm)                     75mm                         75mm
Motor Power(KW/HP)                 0.75KW/1HP                   0.75KW/1.5HP
Machine Dumensions(mm)             600×800×1500mm             900×900×1400mm
Packing Size(mm)                   1050×1050×1500mm           1350×1200×1550mm
Net Weight(No oil)(Kg)             580kg                        750-910kg
Gross Weight(Kg)                   650kg                        800-950kg

Luggage Tag Hydraulic Cutting Machine

The beam press  is suitable for continuously cutting large batch of regular (or of the same specification)nonmetal  materials by forming cutter. It is especially suitable for cutting such  as Baggage Name Tags,Pvc Luggage Tag,Bulk Leather Luggage Tags and so on.

1.Adopt the permanent magnet sucker,allow the upper and lower die cutters can carry out cutting freely with convenient operation.

2.Operation with double hands, can ensure safety of the worker.

3.Equipped with automatic self-lubricating system,so that reducing wear,save labor and cost,prolong its service life.

4.Manual,semi-automatic,fully automatic.You can chose the cutting modes by yourself.

5.Luggage tag hydraulic traveling head die cutting machine of special specification can be customized.

Model                             GRM-25/30/40/50/80/100         GRD-25/30/40/50/80/100

Maximum cutting power(KN/TONS)    25/30/40/50/80/100 Tons        25/30/40/50/80/100 Tons

Cutting Table                    (1600-2500)×(500-1500mm)       (1600-2500)×(500-1500mm)

Traveling head size(mm)          (500mm-1500mm)×(500-1500mm)    (500mm-1500mm)×(500-1500mm)

Max.Stroke(mm)                    150mm                          150mm

Motor Power(KW/HP)                2.2-5.5kw                      2.2-5.5kw

Machine Dumensions(mm)            2200×620×2000mm or more      2200×620×2000mm or more

Weight(kg)                        2300kg                         2300kg

Envelope Hydraulic Die Cutting Machine

This cutting machine is mainly suitable for cutting materials like plastic,paper cutting out. Such as Kraft Paper Envelope,Adhensive Paper Envelope,Wallet Envelope and etc.

1.Use time control,let the setting of cutter depth become more simple and convenient.

2.Use the inertial energy of flying wheel,the energy consumption of the enveloper swing arm die cutting machine is low and the operation stable.

3.The position of rocker can be adjusted by the hand wheel at the top of machine and the cutting stroke is adjusted by timer so that the optimal cutting position can be achieved easily, the working efficiency is enhanced, and the service life of die cutter and cushion board is prolonged.

4.Having the high quality seamless strrl tubes,can guarantee the flexible rotation and good reliability of upper beating board.

5.We will make the envelope hydraulic swing arm die cutting machine according to your request.

Model                              GSB-8,GSB-10                 GSB-2C/10/12/14/16/18

Maximum cutting power(KN/TONS)     78.5KN(8TONS), 98KN(10TONS)  10ton to 18 tons

Cutting Table                      650×350mm                   800×400mm,900×430,450mm

Swaying arm width(mm)              350mm                        350mm 

Max.Stroke(mm)                     75mm                         75mm

Motor Power(KW/HP)                 0.75KW/1HP                   0.75KW/1.5HP

Machine Dumensions(mm)             600×800×1500mm             900×900×1400mm

Packing Size(mm)                   1050×1050×1500mm           1350×1200×1550mm

Net Weight(No oil)(Kg)             580kg                        750-910kg

Gross Weight(Kg)                   650kg                        800-950kg

Combined Fabric Hydraulic Beam Cutting Machine

It is fits for cutting single or multi layer leather,plastic etc.Such as Eva Combined Shoe Fabric,Upholstery Suede Fabric,Toy Suede Fabric and so on.

1.The special cutting board micro-movement device can guarantee the low consumption of the cutting board,save cost of the cutting board.
2.Controlled by the microcomputer,so that the operation is more safe,prompt,simple and convenient.
3.Adopt double oil cylinder,double-crank connecting rod balancing,four-column precise guiding mechanism,can ensure the cutting depth at every cutting position is same.
4.Selection of the automatic feeding system is free.Single-side automatic feeding system,double-side automatic feeding system.
5.Combined fabric hydraulic precision four-column die cutting machines of specifications can be available on request.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

Corrugated Card Hydraulic Cutting Machine

This cutting machine is mainly suitable for cutting materials like plastic,paper cutting out. Such as Single Face Corrugated Paper,Decorative Corrugated Paper,Double Face Corrugated Paper and so on.

1.The corrugated card hydraulic traveling head die cutting machine has the special cutting modes,can save labor and time,improve efficiency.
2.Through the automatic speed variation controls the movement of punch head,can ensure flexible movement with accurate positioning and without impact.
3.Use differential oil way ,to guarantee the cutting is rapid and convenient.
4.Having the good cutting edge,reduce the consumption of the cutting board.
5.Special specification of corrugated card hydraulic traveling head die cutting machine can be customized.
Model                             GRM-25/30/40/50/80/100         GRD-25/30/40/50/80/100
Maximum cutting power(KN/TONS)    25/30/40/50/80/100 Tons        25/30/40/50/80/100 Tons
Cutting Table                    (1600-2500)×(500-1500mm)       (1600-2500)×(500-1500mm)
Traveling head size(mm)          (500mm-1500mm)×(500-1500mm)    (500mm-1500mm)×(500-1500mm)
Max.Stroke(mm)                    150mm                          150mm
Motor Power(KW/HP)                2.2-5.5kw                      2.2-5.5kw
Machine Dumensions(mm)            2200×620×2000mm or more      2200×620×2000mm or more
Weight(kg)                        2300kg                         2300kg

Hydraulic precision receding head leather cutting press

The receding beam press is widely applicable to cutting of various nonmetal materials by die cutter.

1.A receding head press is simple to use with minimum fatigue for the operator.
2.The self-lubricating bearing installed between the spindle and spindle seat requires no lubricating and makes no abrasion.
3.Each point cutting force balance,precise control under the cut point.
4.Suitable for cutting wide and multi-layer materials.
5.The central oil supply automatic lubricating system guatantees machine precision and prolongs service life of machine.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

Hydraulic precision plastic full beam cutting machine

It is applicable to cutting of various nonmetal materials by die cutter.
Such as plastic,Magnetic plastic,Plastic bags and so on.

1.The self-lubricating bearing installed between the spindle and spindle seat requires no lubricating and makes no abrasion.
2.The central oil supply automatic lubricating system guarantees machine precision and prolongs service life of machine.
3.The cutting machine is suitable for cutting wide and multi-layer materials.
4.Using it can save a lot of working time,improve efficiency.
5.Products of special specifications can be customized.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

Sand Paper Full Beam Press

The beam press is widely applicable for cutting of nonmetal materials in various industries by die cutter.

1.Double oil cylinder and precise double-crank connecting rod balancing mechanism are adopted,which can gurantee that the cutting depth at every cutting position is same.
2.Operator to the lowest degree of fatigue.
3.Easy to operate,the rocker is very quick and esay.
4.The central oil supply automatic lubricating system guarantee machine precision and prolongs service life of machine.
5.Products of special specifications can be specially designed and manufactured according to customer requirements.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

Double Tape hydraulic receding beam cutting press for sale

The cutting machine is widely applicable for cutting of nonmetal materials in various industries by die cutter.

1.The oil system of special design,ensure identical cutting depth for each time.
2.It is easy to learn and operate,and save much time and labor resources.
3.The adoption of double-hand operation ensures safety for operators.
4.Suitable for cutting wide and multi-layer materials.
5.The central oil supply automatic lubricating system guarantees machine precision and prolongs service life of machine.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

chemical fibre hydraulic receding beam cutting machine

The beam press is widely applicable for cutting of nonmetal materials in various industries by die cutter.

1.The operation is labor-saving and simple, with low malfunction, strong cutting power and high cutting speed.
2.Double oil cylinder and precise double-crank connecting rod balancing mechanism are adopted,which can gurantee that the cutting depth at every cutting position is same.
3.Each point cutting force balance,precise control under the cut point.
4.The pressing board of cutting carries out slow cutting when it contacts the die cutter,which can make that there is no size error between the uppermost layer and lowermost layer of cut materials.
5.The central oil supply automatic lubricating system guarantees machine precision and prolongs service life of machine.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

plastic hydraulic traveling head insole cutting machine

The cutting machine is mainly suitable for cutting varieties of leather,rubber,plastic fabric,etc with a blade of fixed shape.

1.The mechanism of double oil cylinder,gantry type guiding and precise four-column automatic balancing connection rod can guarantee the same cutting depth of each cutting position.
2.The adoption of double-hand operation ensures safety for operators.
3.The hydraulic system operates under enclosed environment,it can be used for all kinds of the working environments.
4.Each point cutting force balance,precise control under the cut point.
5.The cutting head can automatically move horizontally,with excellent operating visual field and safe and reliable operation.
Model                             GRM-25/30/40/50/80/100         GRD-25/30/40/50/80/100
Maximum cutting power(KN/TONS)    25/30/40/50/80/100 Tons        25/30/40/50/80/100 Tons
Cutting Table                    (1600-2500)×(500-1500mm)       (1600-2500)×(500-1500mm)
Traveling head size(mm)          (500mm-1500mm)×(500-1500mm)    (500mm-1500mm)×(500-1500mm)
Max.Stroke(mm)                    150mm                          150mm
Motor Power(KW/HP)                2.2-5.5kw                      2.2-5.5kw
Machine Dumensions(mm)            2200×620×2000mm or more      2200×620×2000mm or more
Weight(kg)                        2300kg                         2300kg

40T shoe Hydraulic plane travelly head press die cutting press

40T shoe Hydraulic plane travelling head  cutting machine.

1.The mechanism of double oil cylinder,gantry type guiding and precise four-column automatic balancing connection rod can guarantee the same cutting depth of each cutting position.
2.The cutting head can automatically move horizontally,with excellent operating visual field and safe and reliable operation.
3.Operation with double hands,safe and reliable.
4.It makes no noise,keep the working environment quiet.
5.Using it can save a lot of working time,enhance the work efficiency.
Model                             GRM-25/30/40/50/80/100         GRD-25/30/40/50/80/100
Maximum cutting power(KN/TONS)    25/30/40/50/80/100 Tons        25/30/40/50/80/100 Tons
Cutting Table                    (1600-2500)×(500-1500mm)       (1600-2500)×(500-1500mm)
Traveling head size(mm)          (500mm-1500mm)×(500-1500mm)    (500mm-1500mm)×(500-1500mm)
Max.Stroke(mm)                    150mm                          150mm
Motor Power(KW/HP)                2.2-5.5kw                      2.2-5.5kw
Machine Dumensions(mm)            2200×620×2000mm or more      2200×620×2000mm or more
Weight(kg)                        2300kg                         2300kg

Hydraulic PVC Travelly Head Cutting Press

The travelling head cutting machine is widely applicable for cutting many kinds of floor material by die cutter.For example PVC,plastic packing, leather bags and so on.

1.Operator to the lowest degree of fatigue.
2.Cutting depth time adjustment to ensure precision blanking on a variety of materials.
3.Using the machine can save the time ,reduce consumption and wear,improve efficiency.
4.The mechanism of double oil cylinder,gantry type guiding and precise four-column automatic balancing connection rod can guarantee the same cutting depth of each cutting position.
5.Differential oil way is adopted to allow rapid and convenient cutting.
Model                             GRM-25/30/40/50/80/100         GRD-25/30/40/50/80/100
Maximum cutting power(KN/TONS)    25/30/40/50/80/100 Tons        25/30/40/50/80/100 Tons
Cutting Table                    (1600-2500)×(500-1500mm)       (1600-2500)×(500-1500mm)
Traveling head size(mm)          (500mm-1500mm)×(500-1500mm)    (500mm-1500mm)×(500-1500mm)
Max.Stroke(mm)                    150mm                          150mm
Motor Power(KW/HP)                2.2-5.5kw                      2.2-5.5kw
Machine Dumensions(mm)            2200×620×2000mm or more      2200×620×2000mm or more
Weight(kg)                        2300kg                         2300kg

wood industry hydraulic swing beam cutting press

The cutting machine is applicable for cutting of single layer or multi-layer leather, plastic, paperboard, textile etc. materials by die cutter.

1.The machine is equipped with self-lubricating system does not require any manual lubrication, this way you can extend the life of the machine.
2.The inertial energy of flying wheel is used,so that the energy consumption is low and the operation stable.
3.The swing arm can swing freely flexible,best operation line of sight.
4.The switch for operation with both hands ensures the safety fo operators.
5.The use of time control allows for simple and convenient setting of cutter depth.
Model                              GSB-8,GSB-10                 GSB-2C/10/12/14/16/18
Maximum cutting power(KN/TONS)     78.5KN(8TONS), 98KN(10TONS)  10ton to 18 tons
Cutting Table                      650×350mm                   800×400mm,900×430,450mm
Swaying arm width(mm)              350mm                        350mm
Max.Stroke(mm)                     75mm                         75mm
Motor Power(KW/HP)                 0.75KW/1HP                   0.75KW/1.5HP
Machine Dumensions(mm)             600×800×1500mm             900×900×1400mm
Packing Size(mm)                   1050×1050×1500mm           1350×1200×1550mm
Net Weight(No oil)(Kg)             580kg                        750-910kg
Gross Weight(Kg)                   650kg                        800-950kg

special design hydraulic travelly press for making insole accessary

The cutting machine is widely applicable to cutting of various nonmetal materials by die cutter.

1.The machine has special cutting modes,can reduce consumption and save raw materials.
2.The self-lubricating bearing installed between the spindle and spindle seat requires no lubricating and makes no abrasion.
3.Operation with double hands,safe and reliable.
4.Maximum force is achieved using minimum electrical power consumption-this greatly reduces your running costs.
5.Products of special specifications can be customized.
Model                             GRM-25/30/40/50/80/100         GRD-25/30/40/50/80/100
Maximum cutting power(KN/TONS)    25/30/40/50/80/100 Tons        25/30/40/50/80/100 Tons
Cutting Table                    (1600-2500)×(500-1500mm)       (1600-2500)×(500-1500mm)
Traveling head size(mm)          (500mm-1500mm)×(500-1500mm)    (500mm-1500mm)×(500-1500mm)
Max.Stroke(mm)                    150mm                          150mm
Motor Power(KW/HP)                2.2-5.5kw                      2.2-5.5kw
Machine Dumensions(mm)            2200×620×2000mm or more      2200×620×2000mm or more
Weight(kg)                        2300kg                         2300kg