Cuff Hydraulic Die Cutting Machine

The cuff die cutting machine is suitable for cutting different nonmetal materials by die cutter.Such as  Jacket Knitted Cuff,Knitting Fabric Cuff, Non Woven and so on.

1.The cuff hydraulic swing arm die cutting machine's quality is very good,low noise and low oil consumption.
2.Operation of the cuff die cutting press is very convenient,prompt and simple.
3.When you operate the cuff die cutting machine,you should use your two hands. Because it's more safe and reliable.
4.Setting of the knife mold is fast,accurate,prompt,simple and easy-to-learn.
5.Other features can be added on request.
Model                              GSB-8,GSB-10                 GSB-2C/10/12/14/16/18
Maximum cutting power(KN/TONS)     78.5KN(8TONS), 98KN(10TONS)  10ton to 18 tons
Cutting Table                      650×350mm                   800×400mm,900×430,450mm
Swaying arm width(mm)              350mm                        350mm
Max.Stroke(mm)                     75mm                         75mm
Motor Power(KW/HP)                 0.75KW/1HP                   0.75KW/1.5HP
Machine Dumensions(mm)             600×800×1500mm             900×900×1400mm
Packing Size(mm)                   1050×1050×1500mm           1350×1200×1550mm
Net Weight(No oil)(Kg)             580kg                        750-910kg
Gross Weight(Kg)                   650kg                        800-950kg

Hemp Hydraulic Die Cutting Machine

Hemp Hydraulic Die Cutting Machine

1.Oil is supplied to all sliding parts of this machine by the hydraulic system for lubrication, reducing wear and prolonging the service life of the machine.
2.Structural changes during designing of this machine remove the need for the users to worry about possible oil leakage of the machine.
3.External motor and oil pump enable good ventilating and cooling conditions , safety operation and prolonged service life.
4.With special setting mechanism, and equipped with die cutter and cutting depth setting, the travel adjustment is simple and accurate.
5.Hemp hydraulic precision four-column die cutting machine of special specification can be customized.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

Invitation Card Hydraulic Traveling Head Die Cutting Machine

The invitation card hydraulic traveling head  cutting machine applies to the shaping and the cutting of one layer or several layers of the materials.

1.Easy to learn how to operate the invitation card die cutting machine .
2.Setting of the knife mold is rapid,accurate and convenient.
3.The hydraulic system operates under enclosed environment, it requires little to the working environment .
4.The press board's lifting position can be freely set,so that reducing idle travel and improve work efficiency.
5.Invitation card hydraulic travlly die cutting machine of special specification can be customized.
Model                             GRM-25/30/40/50/80/100         GRD-25/30/40/50/80/100
Maximum cutting power(KN/TONS)    25/30/40/50/80/100 Tons        25/30/40/50/80/100 Tons
Cutting Table                    (1600-2500)×(500-1500mm)       (1600-2500)×(500-1500mm)
Traveling head size(mm)          (500mm-1500mm)×(500-1500mm)    (500mm-1500mm)×(500-1500mm)
Max.Stroke(mm)                    150mm                          150mm
Motor Power(KW/HP)                2.2-5.5kw                      2.2-5.5kw
Machine Dumensions(mm)            2200×620×2000mm or more      2200×620×2000mm or more
Weight(kg)                        2300kg                         2300kg

Silicone Vacuum Membrane Hydraulic Die Cutting Machine

The Silicone Vacuum Membrane Hydraulic Die Cutting Machine is widely applicable to cutting of various nonmetal materials by die cutter.

1.The silicone keypad hydraulic clicking press's motor power is small,can ensure the low powe consumption of it.
2.Using two hands toe operate the switch to ensure the safety of operators.
3.The characteristics of silicone keypad hydraulic cutting machine include low noise and low consumption.
4.Using a time-lapse circuit to control the lower limit of stroke,so that ensure the silicone keypad is high quality.
5.Other features of the silicone keypad hydraulic die cutting machine can be added on request.
Model                              GSB-8,GSB-10                 GSB-2C/10/12/14/16/18
Maximum cutting power(KN/TONS)     78.5KN(8TONS), 98KN(10TONS)  10ton to 18 tons
Cutting Table                      650×350mm                   800×400mm,900×430,450mm
Swaying arm width(mm)              350mm                        350mm
Max.Stroke(mm)                     75mm                         75mm
Motor Power(KW/HP)                 0.75KW/1HP                   0.75KW/1.5HP
Machine Dumensions(mm)             600×800×1500mm             900×900×1400mm
Packing Size(mm)                   1050×1050×1500mm           1350×1200×1550mm
Net Weight(No oil)(Kg)             580kg                        750-910kg
Gross Weight(Kg)                   650kg                        800-950kg

Plastic Sheet Hydraulic Die Cutting Machine

The machine is applicable to die cutting operation of various nonmetal slices materials by die cutter.

1.The hydraulic system works under enclosed environment,there is no request of the working environment.
2.Minimizes the need of maintenance, offering maximum reliability and high value over time.
3.Simple and efficient cutting point setting .
4.Euipped with automatic self-lubricating system,ensure the low wear of plastic sheet hydraulic die cutting machine.
5.Plastic sheet hydraulic precision four-column die cutting machine of special specification can be customized.
Model                              GRB-25/30/40/50      GRB-60/80/100      GRB-120/150/200      GRB-300/400/500
Maximum cutting power(KN/TONS)     25/30/40/50Tons      60/80/100Tons      120/150/200Tons      300/400/500Tons
Cutting Table       (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm)  (1250-2500)×(500-1500mm) (1600-2500)×(500-1500mm)
Max.Stroke(mm)                     250mm                250mm              250mm                250mm
Motor Power(KW/HP)                 2.2-4KW              5.5-7.5KW          11KW                 22KW
Machine Size(mm)                2200×2700×1300mm     2300×2800×1300mm  2500×3100×1500mm   2500×3100×1500mm
Weight(kg)                         1600kg-3300kg        4300kg-7600kg      9500kg-13000kg       15000kg-33000kg

Hat Brim Hydraulic Clicker Press

This cutting machine is mainly suitable for cutting materials like plastic cutting out.

1.Time control allow for simple and convenient setting of the cutter depth.
2.Using the inertial energy of flying wheel, can reduce the energy consumption and let the operation stable.
3. Adjusting height of swing arm by handle , so the operation is very simple,prompt and convenient.
4.Because the rotation of swing arm is flexible , the operation is very easy . Saving labor and time.
5. Hat brim hydraulic die cutting machine of special specification can be customized according to your request.
Model                              GSB-8,GSB-10                 GSB-2C/10/12/14/16/18
Maximum cutting power(KN/TONS)     78.5KN(8TONS), 98KN(10TONS)  10ton to 18 tons
Cutting Table                      650×350mm                   800×400mm,900×430,450mm
Swaying arm width(mm)              350mm                        350mm
Max.Stroke(mm)                     75mm                         75mm
Motor Power(KW/HP)                 0.75KW/1HP                   0.75KW/1.5HP
Machine Dumensions(mm)             600×800×1500mm             900×900×1400mm
Packing Size(mm)                   1050×1050×1500mm           1350×1200×1550mm
Net Weight(No oil)(Kg)             580kg                        750-910kg
Gross Weight(Kg)                   650kg                        800-950kg

Luggage Tag Hydraulic Cutting Machine

The beam press  is suitable for continuously cutting large batch of regular (or of the same specification)nonmetal  materials by forming cutter. It is especially suitable for cutting such  as Baggage Name Tags,Pvc Luggage Tag,Bulk Leather Luggage Tags and so on.

1.Adopt the permanent magnet sucker,allow the upper and lower die cutters can carry out cutting freely with convenient operation.

2.Operation with double hands, can ensure safety of the worker.

3.Equipped with automatic self-lubricating system,so that reducing wear,save labor and cost,prolong its service life.

4.Manual,semi-automatic,fully automatic.You can chose the cutting modes by yourself.

5.Luggage tag hydraulic traveling head die cutting machine of special specification can be customized.

Model                             GRM-25/30/40/50/80/100         GRD-25/30/40/50/80/100

Maximum cutting power(KN/TONS)    25/30/40/50/80/100 Tons        25/30/40/50/80/100 Tons

Cutting Table                    (1600-2500)×(500-1500mm)       (1600-2500)×(500-1500mm)

Traveling head size(mm)          (500mm-1500mm)×(500-1500mm)    (500mm-1500mm)×(500-1500mm)

Max.Stroke(mm)                    150mm                          150mm

Motor Power(KW/HP)                2.2-5.5kw                      2.2-5.5kw

Machine Dumensions(mm)            2200×620×2000mm or more      2200×620×2000mm or more

Weight(kg)                        2300kg                         2300kg